Guitar Related Ramblings

Quick Zonk Machine layout to suit an enclosure that I just picked up from MW Pedal Parts - pretty much one row difference in terms of where...

I thought a post was required for the silicon Zonk II, as looking at some schematics online, some appeared to be a little different.  Being ...

I saw this on the Gray Bench Electronics youtube channel , and given the cost and apparent popularity of Reeves pedals, I thought I'd po...

Not a huge amount of variation on Zonks in terms of component values, and at one stage this was all on the MKI table, but I decided to spli...

Similar to the previous Zonk Machine, this has a MKI switch for a larger input cap.  Have had this on the breadboard recently, and decided t...

This is my version of the Zonk Machine, based on one of the early vero layouts.  I added a switch for the input cap, which is possibly the m...

I started copying the original layout for veroboard and gave up toward the end as it's a cramped mess - this is a similar but more pract...

This is the original layout for the Hornby Skewes Hybrid Zonk Machine (Silicon / Germanium).  Unfortunately, the trimmer needed to be a diff...

As far as I know, only a handful of D*A*M FZ-678 were ever made, maybe 5 in total - it's a variation on a Zonk Machine.  It's the sa...

Another D*A*M layout that I traced from photos is the Zoot Unit ZU-65, which is a Zonk Machine....    I did see a couple of photos with what...

I've already made a point-to-point layout for this, and as I'm currently on a 0.15" D*A*M vero roll, I thought, why not...   an...