I've already made a point-to-point layout for this, and as I'm currently on a 0.15" D*A*M vero roll, I thought, why not...   and it's a Zonk Machine with tweaks.

Remarkably similar to the original D*A*M layout, I did move the output from the board a little and swapped pins on the swell pot to a more standard configuration.  If you want to change it, I'm sure you'll work it out.

The D*A*M layout has a standing axial capacitor, which doesn't really work on DIYLC, so I used a standard cap and added polarity markers.

D*A*M FZ-673 FUZZ -  0.15" VERO LAYOUT