The Hornby Skewes Zonk Machine is pretty much a MKI Tone Bender with some value changes - most notably the 1n capacitor on the input and resistors to collectors.
A classic guitar effect from back in the day.
HORNBY SKEWES ZONK MACHINE - ORIGINAL TAG BOARD LAYOUT
TAG BOARD LAYOUT
There's enough room on a 12-lug tag board for all the components, so here it is... probably worth adding an electrolytic from V+ to V- somewhere too. Just keep in mind that you will need to leave room for mounting screws at either end, so bend around the holes a little.
I didn't include all the wiring - as you can see, there needs to be a few jumpers to connect V- and grounds. I left them off to make it easier to read, assuming that people can work out what goes where on their own.
Photos care of effects database.
No comments:
Post a Comment