COLORSOUND x D*A*M: Fuzz Sound

Following on from the previous post, this is the D*A*M version of the Colorsound Fuzz Sound.  Thread on the D*A*M forum can be found here.   Basically take a D*A*M Fuzz Sound, and change the Fuzz pot to an internal trimmer. 

Unlike the regular Park 2 knob with a large 25u coupling cap between the darlington pair and Q3, D*A*M has stuck with the stock 220n cap.  However, the cap from the emitter of the darlington pair to ground has been increased, which provides a bit of a bass boost.  There's also the bigger caps in the filter section, often used by Dave Main, which is also my favourite set-up.  It just drops the cut-off of the high pass filter on the treble side down and helps with the bass response.   It also has a smaller resistor between the tone and volume pot.  

So despite the smaller coupling cap, this has been accounted for elsewhere.

COLORSOUND x D*A*M FUZZ SOUND -  0.15" VERO LAYOUT