Search This Blog

Thursday, August 3, 2023

PARK: Fuzz Sound, Two Knob Version, tag board layout

Request for Phil - one tag board layout for the Park 2 knob fuzz sound.   I generally prefer to keep the links below the board, as it looks neater.  I don't mind linking two adjacent lugs on top, as you hardly notice it.

One suggestion for this.   The D*A*M Colosround Fuzz Sound has a few different values and an internal trimmer to fine-tune the fuzz.   They say that it's set at about 90% - so given that the pot is normally 100k, you could use a 10k resistor instead of a link under the board, or any value resistor of your choice. 

Check the MKIII component values table as a reference.  Stock values are listed below.

PARK TWO KNOB FUZZ - TAGBOARD LAYOUT

PARK TWO KNOB FUZZZ TAGBOARD LAYOUT


By at
Labels: , , , ,
Location: Balmoral QLD 4171, Australia

4 comments:

  1. PhilAugust 5, 2023 at 1:56 AM

    Brilliant thanks Andy,
    So replacing the light blue jumper with a 10k resistor should mimic the trimmer pot at 90 % ala DAM Colousound?

    ReplyDelete
    Replies
    1. AndrewAugust 5, 2023 at 5:28 AM

      Yep. I’ll post a vero with the trimmer shortly.

      Delete
  2. Mister HateAugust 6, 2023 at 11:41 PM

    Maybe my favourite MKIII (strictly talking because Buzzaround is my favourite ever but it's not exactly the same... )

    Because... who needs a gain pot? Hahahaha

    ReplyDelete
    Replies
    1. AndrewAugust 7, 2023 at 6:59 AM

      I still like having the fuzz control there, even if it is a little redundant with some transistor setups.

      Delete

Subscribe to: Post Comments (Atom)