Like Tube Screamer overdrive, but hate the Tube Screamer mid bump and lo-cut? Then the Yamaha OD-10MII Overdrive might be just the thing for you.
Schematic at Aion
YAMAHA OD-10MII OVERDRIVE - VERO LAYOUT
v2 corrected
Like Tube Screamer overdrive, but hate the Tube Screamer mid bump and lo-cut? Then the Yamaha OD-10MII Overdrive might be just the thing for you.
Schematic at Aion
Hi,
ReplyDeleteI realise that this is old but I think I've found a few errors when comparing it with the Aion schematic. Assuming that I'm reading the schematic correctly, which isn't guaranteed.The top left 47nF capacitor that connects pins 1 and 3 of the IC, I don't think should be there at all. The 560pF capacitor should connect between pins 6 & 7, but it's currently connecting between pins 5 & 7. I think there's a missing cut somewhere around column 17 row 14.
Thanks for pointing that out Sooty - layout updated. Think I uploaded a version of a working file instead of the final back in 2021.
DeleteNo problem, I've just got to figure out the most sensible way of correcting my almost completed board. Are there any other traps that I've missed?
DeleteI'd solder the 560pf under the board, directly on the copper strips. Note the additional cut on row 14 next to the 220 ohm resistor.
Delete